国产无套护士在线观看_国产精品乱码高清在线观看_好男人社区WWW在线观看_片多多在线观看视频

產品名稱：Multi-Channel Sequence Box (FCS456) 多通道序列盒（FCS456）

Key Features

l  Available in 2,4,6,or 8 Channel variants

l  Individual Pass/Fail indication per channel

l  Individual Active Channel indication

l  Replicator Pass/Fail outputs for interface to external control system

l  Complete with interface cables to FCO750/FCO770 Leak Detector

l 提供2,4,6或8通道型號

l  每個頻道的單獨通過/失敗指示

l  個人活動頻道指示

l  復制器通過/失敗輸出，用于與外部控制系統的接口

l  配備FCO750 / FCO770檢漏儀接口電纜

The FCS456 model provides a successful answer to the common question of “can I test more than 1 at a time?”. In modern manufacturing where productivity and efficiency are key to the success of any business, the FCS456 brings an opportunity to dramatically improve throughput efficiency without compromise to the integrity of 100% leak testing of similar components or assemblies. The popular method of grouping parts together for leak test brings high levels of risk and uncertainty where there is no way of segregating Pass/Fail parts or even knowing which of the group may have caused the Fail result.

FCS456模型成功解答了“我可以一次測試多于1個？”的常見問題。在現代制造業中，生產力和效率是任何企業成功的關鍵，FCS456為大幅提高生產效率提供了機會，同時不會影響類似組件或組件100％泄漏測試的完整性。將零件分組在一起進行泄漏測試的流行方法會帶來高風險和不確定性，因?yàn)闊o法分離通過/失敗部件，甚至無法知道哪個組可能導致失敗結果。

The FCS456 has built in control for parallel Filling of the test group but most importantly, individual Stabilisation and Measurement phases. This combined with individual Pass/Fail indication eliminates the risk and provides result per part.Linked to the FCO750 or FCO770 Leak Detection instrument, the parameters can be tuned and set to optimum whether you are testing identical groups of parts or a collection of similar components. The only criteria is that the Test Pressure is the same for all in the group.

FCS456內置了對并行填充測試組的控制，但最重要的是，單獨的穩定和測量階段。這與單獨的通過/失敗指示相結合，消除了風險并提供了每個部件的結果。連接到FCO750或FCO770泄漏檢測儀器，無論您是測試相同的零件組還是一組類似組件，都可以調整參數并將其設置為最佳值。。唯一的標準是測試壓力對于組中的所有人都是相同的。

Virtually any item which lends itself to leak testing at positive or vacuum pressure can be tested with greatly reduced cycle time when grouped together and tested using the FCS456. 

事實上，任何適合在正壓或真空壓力下進行泄漏測試的產品都可以在組合在一起并使用FCS456進行測試時大大縮短循環時間

上一篇:Case Integrity/Combustion Soundness Tester (FCS510) 案例完整性/燃燒完好性測試儀

下一篇:Pressure Relief Valve Tester (FCO750F) 泄壓閥測試儀（FCO750F）